Technical properties
Material Specific Properties | Value | Unit |
|---|---|---|
| Melting Temperature | Melting Temperature Value 15 - 172 | Melting Temperature Unit °C |
| Density | Density Value 1.65 - 1.75 | Density Unit g/cm3 |
| Properties range of Printed Parts | XY Direction | Z Direction | Unit | Test Standard Method |
|---|---|---|---|---|
| Tensile Modulus | Tensile Modulus XY Direction 1900 – 2300 | Tensile Modulus Z Direction 1750 - 2050 | Tensile Modulus Unit MPa | Tensile Modulus Test Standard Method ASTM D638 (Type IV) |
| Tensile Stress at Yield | Tensile Stress at Yield XY Direction 37 – 45 | Tensile Stress at Yield Z Direction 36 - 39 | Tensile Stress at Yield Unit MPa | Tensile Stress at Yield Test Standard Method ASTM D638 (Type IV) |
| Tensile Strain at Yield | Tensile Strain at Yield XY Direction 8 – 11 | Tensile Strain at Yield Z Direction 6 - 9 | Tensile Strain at Yield Unit % | Tensile Strain at Yield Test Standard Method ASTM D638 (Type IV) |
| Tensile Strain at Break | Tensile Strain at Break XY Direction 20 – 31 | Tensile Strain at Break Z Direction 7 - 11 | Tensile Strain at Break Unit % | Tensile Strain at Break Test Standard Method ASTM D638 (Type IV) |
| Flexural Modulus | Flexural Modulus XY Direction 1350 – 1450 | Flexural Modulus Z Direction 1268 - 1276 | Flexural Modulus Unit MPa | Flexural Modulus Test Standard Method ASTM D790 |
| Flexure Stress at Yield (zero slope) | Flexure Stress at Yield (zero slope) XY Direction 52 – 53 | Flexure Stress at Yield (zero slope) Z Direction 52 - 54 | Flexure Stress at Yield (zero slope) Unit MPa | Flexure Stress at Yield (zero slope) Test Standard Method ASTM D790 |
| Flexure Strain at Yield (zero slope) | Flexure Strain at Yield (zero slope) XY Direction 7.3 - 7.7 | Flexure Strain at Yield (zero slope) Z Direction 7.3 - 8.3 | Flexure Strain at Yield (zero slope) Unit % | Flexure Strain at Yield (zero slope) Test Standard Method ASTM D790 |
| Izod Impact - Notched | Izod Impact - Notched XY Direction 4 - 6 | Izod Impact - Notched Z Direction 3.5 - 4.5 | Izod Impact - Notched Unit kJ/m2 | Izod Impact - Notched Test Standard Method ASTM D256 |
| Typical Printing Parameters | Value | Unit |
|---|---|---|
| Nozzle Temperature | Nozzle Temperature Value 260 - 280 | Nozzle Temperature Unit °C |
| Build Plate Temperature | Build Plate Temperature Value 70 - 110 | Build Plate Temperature Unit °C |
| Build Plate Coating | Build Plate Coating Value Film* | |
| Printing Speed | Printing Speed Value 20 - 40 | Printing Speed Unit mm/s |
| Cooling Fan | Cooling Fan Value Medium | |
| Infill Density | Infill Density Value 100 | Infill Density Unit % |
| Infill Pattern | Infill Pattern Value Grid | |
| Top / Bottom solid layers | Top / Bottom solid layers Value 2 | |
| Shell line number | Shell line number Value 2 |
* Typical values only. Not to be considered product specifications.
Arkema France - A French Société Anonyme registered with the Commercial and Companies Register of Nanterre (France) under number 319 632 790 – Dircom – 4646E/11.2018/10 – MultiBus. © 2018 Arkema. All rights reserved – Nude
Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on http://www.arkema.com/en/products/product-safety/disclaimer/index.html
Kynar® is a registered trademark of Arkema.
Headquarters: Arkema France
420, rue d’Estienne d’Orves,
92705 Colombes Cedex – France
Phone: +33 (0)1 49 00 80 80
Fax: +33 (0)1 49 00 83 96
arkema.com