3D printing Arkema – Engineered resins

Technical properties

N3D I-2105 FOR IMPACT RESISTANCE


IMPACT N3D I-2105 Impact reference
Viscosity (mPa.s @25°C)

Viscosity (mPa.s @25

°

C)

IMPACT N3D I-2105

670

Viscosity (mPa.s @25

°

C)

Impact reference

2600

Tα (°C)

Tα (

°

C)

IMPACT N3D I-2105

45

Tα (

°

C)

Impact reference

48

Unnotched Impact Resistance (KJ/m²)

Unnotched Impact Resistance (KJ/m

²

)

IMPACT N3D I-2105

70

Unnotched Impact Resistance (KJ/m

²

)

Impact reference

54

Elongation @ break (%)

Elongation @ break (%)

IMPACT N3D I-2105

45

Elongation @ break (%)

Impact reference

19


Printed specimens of N3D I-2105 exhibit an excellent impact resistance, compared to a commercial reference, with similar Tg.
N3D I-2105 enables the manufacturing of functional parts.

Tα and Unnotched Impact Resistance on printed specimens


N3D I-2105
Impact resistance (KJ/m2) : 70
: 45°C

Impact reference
Impact resistance (KJ/m2) : 54
: 48°C


N3D F-2115 FOR FLEXIBILITY


FLEXIBLE N3D F-2115 Flexible reference
Viscosity (mPa.s @25°C)

Viscosity (mPa.s @25

°

C)

FLEXIBLE N3D F-2115

660

Viscosity (mPa.s @25

°

C)

Flexible reference

4400

Shore Hardness

Shore Hardness

FLEXIBLE N3D F-2115

70A

Shore Hardness

Flexible reference

80A


Different flexibilities are achievable depending on the post treatment applied. N3D F-2115’s elongation at break and modulus are fine tunable to reach the desired set of properties : elongation, tear resistance, Shore A hardness. In all tested conditions, N3D F-2115 exhibits a higher flexibility than benchmarked commercial reference.

N3D P-2125 FOR PROTOTYPING


PROTOTYPING N3D P-2125 Prototyping reference
Viscosity (mPa.s @25°C)

Viscosity (mPa.s @25

°

C)

PROTOTYPING N3D P-2125

420

Viscosity (mPa.s @25

°

C)

Prototyping reference

750

Young modulus (MPa)

Young modulus (MPa)

PROTOTYPING N3D P-2125

2050

Young modulus (MPa)

Prototyping reference

2900

Tensile strength (MPa)

Tensile strength (MPa)

PROTOTYPING N3D P-2125

52

Tensile strength (MPa)

Prototyping reference

67

Elongation @ break (%)

Elongation @ break (%)

PROTOTYPING N3D P-2125

6

Elongation @ break (%)

Prototyping reference

3


N3D P-2125 exhibits a homogeneous network, enabling an excellent processability and limited evolution of mechanical properties after post curing.

Arkema France - A French Société Anonyme registered with the Commercial and Companies Register of Nanterre (France) under number 319 632 790 – Dircom – 4642E/11.2018/10 – MultiBus – Pictures: GettyImages, Sartomer © 2018 Arkema. All rights reserved – Nude

Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on http://www.arkema.com/en/products/product-safety/disclaimer/index.html

The information contained in this document is based on trials carried out by our Research Centers and data selected from the literature, but shall in no event be held to constitute or imply any warranty, undertaking, expressed or implied commitment from our part. Our formal specifications define the limit of our commitment. No liability whatsoever can be accepted by Arkema with regard to the handling, processing, or use of the product or products concerned - which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.

3D-arkema.com

Headquarters: Arkema France
420, rue d’Estienne d’Orves, 
92705 Colombes Cedex – France. 
Phone: +33 (0)1 49 00 80 80
Fax: +33 (0)1 49 00 83 96
arkema.com