3D printing Arkema - Orgasol

Technical properties

Material – Typical Properties
Value
Method
Mean Diameter:
Mean Diameter:
Value
42 µm
Mean Diameter:
Method
ISO 13319
Particle Size Distribution:


Fine Particles < 30 µm
Fine Particles < 30 µm
Value
5 max. %
Fine Particles < 30 µm
Method
ISO 13319
Coarse Particles > 70 µm
Coarse Particles > 70 µm
Value
5 max. %
Coarse Particles > 70 µm
Method
ISO 13319
Bulk Packed Density
Bulk Packed Density
Value
0.55 g/cm3
Bulk Packed Density
Method
ISO 1068-1975
Melting Point:
Melting Point:
Value
183°C
Melting Point:
Method
ISO 11357-3
Heat Deflection Temperature (HDT@1.8Mpa):
Heat Deflection Temperature (HDT@1.8Mpa):
Value
40°C
Heat Deflection Temperature (HDT@1.8Mpa):
Method
ISO 75f


Sintered Parts – Typical Performance (x/y direction) *
Value
Method
Tensile Modulus:
Tensile Modulus:
Value
1800 Mpa
Tensile Modulus:
Method
ISO 527-2:93-1B
Tensile Strength At Break:
Tensile Strength At Break:
Value
45 Mpa
Tensile Strength At Break:
Method
ISO 527-2:93-1B
Elongation At Break:
Elongation At Break:
Value
20 %
Elongation At Break:
Method
ISO 527-2:93-1B
Flexural Modulus:
Flexural Modulus:
Value
1500 Mpa
Flexural Modulus:
Method
ISO 178 (23°C)
Impact Strength (Charpy - unnotched):
Impact Strength (Charpy - unnotched):
Value
34 kJ/m2
Impact Strength (Charpy - unnotched):
Method
ISO 179 1eU (23°C)
Hardness (Shore D - instantaneous):
Hardness (Shore D - instantaneous):
Value
76
Hardness (Shore D - instantaneous):
Method
ISO 868 (20°C)

* Properties are depedant upon process conditions and machine used, so these figures are only given for information

Arkema France - A French Société Anonyme registered with the Commercial and Companies Register of Nanterre (France) under number 319 632 790 – Dircom – 4644E/11.2018/ 10 – MultiBus. © 2018 Arkema. All rights reserved – Nude

Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on 
http://www.arkema.com/en/products/product-safety/disclaimer/index.html

The information contained in this document is based on trials carried out by our Research Centers and data selected from the literature, but shall in no event be held to constitute or imply any warranty, undertaking, expressed or implied commitment from our part. Our formal specifications define the limit of our commitment. No liability whatsoever can be accepted by Arkema with regard to the handling, processing, or use of the product or products concerned - which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.

3D-arkema.com

Headquarters: Arkema France
420, rue d’Estienne d’Orves, 
92705 Colombes Cedex – France. 
Phone: +33 (0)1 49 00 80 80
Fax: +33 (0)1 49 00 83 96
arkema.com